CN
Make our world a less carbon-intensive place
High Power/efficiency
670w,21.6%
Low attenuation
0.55%,0.45%
Low lcoe & Bos
8.9%, 5.7%
vs.445w(166 mm single crystal cell module)

CS7L-MB-AG

575~600W, 21.0%

CS7N-MB-AG

635~660W, 21.2%

182

Series

GCL-M10/54H

385-420W

GCL-M10/72H

525-560W

GCL-M10/72GDF

525-555W

GCL-M10/72GDF

550-580W

TOPCon

Double-sided double glass

Positive energy efficiency

(Component efficiency of up to 22.5% )

Half-chip technology

Double side double glass tape frame assembly

2384*1303*35mm

3.11 sqm ㎡

210 66GDF 680-700W
High Power/efficiency
550W,21.5%
Low attenuation
0.55%,0.45%
Low lcoe & Bos
12.3%, 5.6%
Vs. 405W (158.75 mm single crystal cell module)

CS6W-MS

525~550W, 21.5%

CS6W-MB-AG

520~545W, 21.2%

210

Series

GCL-M12/60H

580-615W

GCL-M12/66H

640-675W

GCL-M12/60GDF

590-610W

GCL-M12/66GDF

635-670W

210 66GDF 700-720W

TOPCon

Double-sided double glass

Positive energy efficiency

(Component efficiency of up to 22.5% )

Half-chip technology

Double side double glass tape frame assembly

2384*1303*35mm

3.11 sqm ㎡

  • The maximum conversion rate is up to 98.8%

  • The maximum 1.5 times DC superdistribution

  • 1.1 times AC continuous overload

  • Zero-voltage crossing function

  • No fuse design on DC side

  • Effectively reduce freight cost

  • Support DC arcing protection

  • Double-sided components

  • PLC communication support

  • I-V curve scanning

  • support DC arc protection

  • support Bluetooth simple and quick configuration

  • internal humidity detection, timely warning

Distributed large-scale ground photovoltaic support system

The basic equipment of DPV system includes PV module, PV square bracket, DC bus, DC distribution cabinet, solar inverter, AC distribution cabinet, etc. , there are power supply monitors and Environmental monitoring. Installation: distributed ground large photovoltaic support system material: hot-dip zinc/zinc aluminum magnesium/weathering steel

Installation method:distributed ground large-scale photovoltaic support system

Material:hot dip galvanized/zinc aluminum magnesium/weathering steel

Fixed PV bracket system with adjustable inclination

The local optimum installation inclination is calculated, and then all arrays are fixed with this inclination angle, which is now widely used in flat roof power plants and ground power plants.

Installation:the best inclination-fixed type

Material:hot dip galvanized/zinc aluminum magnesium/weathering steel

Place of origin:Tianjin Mare Tranquillitatis

Tilt angle fixed PV bracket system

Fixed angle adjustable means that at the turning point of solar incident angle change, the fixed bracket tilt angle is adjusted periodically to increase the direct absorption of sunlight and increase the power generation under the condition of slightly increasing cost.

Installation:horizontal single axis-tracking type

Material:hot dip galvanized/zinc aluminum magnesium/weathering steel

Advantage

1.simple structure, reasonable layout, safe use, easy maintenance

2.can limit the short-circuit current amplitude and time

3.It can protect the transformer reliably and effectively

4.The utility model has the function of disconnecting switch and can install earthing switch

5.Advanced computer-aided design, improve product structure and size standards


Advantage

1.GGD AC low-voltage distribution cabinet cabinet with the form of a general cabinet

2.GGD has different number of heat dissipation shackle holes at both ends of the cabinet.

3.The cabinet door is connected with the frame by a rotating shaft type movable hinge, which is convenient for installation and disassembly.